Branch Logger RP200 Super
£7,000.00 – £7,150.00
RP200 SUPER PRO with hydraulic conveyor
INNER WIDTH | 300mm |
INTERLINE SPACING | 200mm |
BLADE THICKNESS | 15mm |
THE DIAMETER OF THE GEARS (hardened by induction) |
340mm |
COVER THICKNESS | 20mm |
POWER DEMAND (at the PTO output) |
Min – 70HP Recommended – 150HP |
LENGTH OF CUT BRANCHES | 3 knives on the shaft : 18-30cm 4 knives on the shaft : 15-25cm |
MAX DIAMETER OF CUT BRANCHES (at recommended power or above)
|
FRESH SOFTWOOD UP TO : 170mm FRESH HARDWOOD UP TO: 160mm DRY HARDWOOD UP TO : 150mm
|
RECOMMENDED PTO SHAFT SPEED |
540 per min
|
FLYWHEEL: 80kg
LENGTH / WIDTH CONVEYOR BELT: 400/40cm
WEIGHT: 800kg
Description
Information
RED DRAGON RP-200 SUPER-PROFESSIONAL roller chopper is designed for cutting branches with a diameter of up to 17 cm, completely designed and developed by REMET CNC TECHNOLOGY. The frame is made of metal sections of wide spacing of support, expandable extended inlet hopper of high rigidity and reinforced with a section. The chopper is fitted with safety switch around the inlet hopper (safety switch should be connected with emergency module in the tractor). Cutting mechanisms manufactured precisely on CNC machining centre from one assumption to provide proper quality, accuracy and axis alignment which translates into long service life of sub-assemblies and the entire device. The mechanism is fitted with an expanding and clamping sleeve which serves for the positioning of cutting blades, and also performs a function of overload protection. The chopper may be fitted with a flywheel/pulley and expandable belt conveyor, thanks to which chopper operation becomes more effective and much more comfortable.
Chopper’s drive is transmitted by power transmission shaft from tractor’s WOM (right-hand rotation) We recommend using power transmission shafts fitted with a with shear pin coupling (available in our offer), in the case of machine overload the pin is sheared thus switching off the drive.
Processed wood is an effective and organic fuel, ideally suited for burning in all types of central heating furnaces.
Blades of cutting mechanism are made of HARDOX abrasion resistant steel guaranteeing long and effective operation of the machine.
Specification:
- reinforced welded structure (completely expandable)
- adjustable clearance between blades
- inductively hardened toothed gears
- reinforced frame made of metal sections
- extended expandable inlet hopper reinforced with a section with safety switch
- ball and shaft fastener for trailer
- three-point linkage for tractor
Additional information
Model | RP200/3, RP200/4 |
---|