Wood Chipper RT630
|Minimum / recommended power||15/45 HP|
|Max. diameter of branch cutting (fresh and soft wood)||130 mm|
|Max. diameter of branch cutting (fresh and hard wood)||110 mm|
|Max. diameter of branch cutting (dry and hard wood)||100 mm|
|Recommended rotation of PTO (PTO INCLUDE)||540-1000 RPM|
|Cutting blade version||Steel HARDOX type 500|
|Inlet hopper||48 / 48 cm|
|Chopper dimensions with folded inlet hopper length / width / height||85 / 85 / 150 cm|
|Chopper fixing system||Three point linkage CAT1 / CAT2|
|Cutting disk diameter||630 mm|
|Number of blades||4 + 1 reverse|
|Ejection pipe rotation angle||360˚|
|Height of ejection pipe||155 cm|
RT-630 disk chopper is designed for shredding branches, trunks with a diameter of up to 13 cm, and other wooden materials e.g. lumber-mill chips. The thickness of forest chips may be adjusted by means of four replaceable blades (made of HRDOX 500 steel), by adjusting their position against counter-blade. Blades are fixed to cutting disk with a diameter of 630 mm, which due to its weight serves as a flywheel.
The chopper is fitted with protective covers providing safe operation. Discharge stack may be rotated 360˚ in order to discharge stream of chips in proper direction. The chopper is characterised by high capacity and high comfort of operation. Chips may be used as a fuel (useful for screw feeders) or as a compost or a priming for shrubs.
Chopper’s drive is transmitted by power transmission shaft from tractor’s PTO (right-hand rotation). We recommend using power transmission shafts fitted with a shear pin coupling (available in our offer), in the case of machine overload the pin is sheared thus switching off the drive. Lubricating of rolling bearing is done by means of grease nipples in bearing shell.
PLEASE SEE VIDEO: