Wood chipper RT720R
- Wood chipper has hydraulic rollers with adjustable feed so you can adjust the size sawdust.
- -it has a safe switch
- Minimum power 55HP / recommended power 80HP
|Max. diameter of branch cutting (fresh and soft wood)||170 mm|
|Max. diameter of branch cutting (fresh and hard wood)||150 mm|
|Max. diameter of branch cutting (dry and hard
- Knives 4 +1 reversible
- Outlet pipe 360’
- High outlet pipe 2.1m
- Diameter disc cutter 720mm
- Weight disc cutter 85kg
- Flow oil 60l/pm
- PTO RPM – 540 / 1000
- Weight 450kg
- PTO Include
RT-720 disk chopper is designed for shredding branches, trunks with a diameter of up to 17 cm, and other wooden materials e.g. lumber-mill chips. The thickness of forest chips may be adjusted by means of four replaceable blades (made of HRDOX 500 steel), by adjusting their position against counter-blade. Blades are fixed to cutting disk with a diameter of 720 mm, which due to its weight serves as a flywheel.
The chopper is fitted with protective covers providing safe operation. Discharge stack may be rotated 360˚ in order to discharge stream of chips in proper direction. The chopper is characterised by high capacity and high comfort of operation. Chips may be used as a fuel (useful for screw feeders) or as a compost or a priming for shrubs.
Chopper’s drive is transmitted by power transmission shaft from tractor’s WOM (right-hand rotation). We recommend using power transmission shafts fitted with a shear pin coupling (available in our offer), in the case of machine overload the pin is sheared thus switching off the drive. Lubricating of rolling bearing is done by means of grease nipples in bearing shell.