Wood Chipper RT690R
Wood chipper RT690R
- Wood chipper has hydraulic rollers with adjustable feed so you can adjust the size sawdust.
- -it has a safe switch
- Minimum power 35HP / recommended power 50HP
|Max. diameter of branch cutting (fresh and soft wood)||130 mm|
|Max. diameter of branch cutting (fresh and hard wood)||110 mm|
|Max. diameter of branch cutting (dry and hard
- Knives 4 +1 reversible
- Outlet pipe 360’
- High outlet pipe 1.7m
- Diameter disc cutter 625mm
- Weight disc cutter 60kg
- Flow oil 60l/pm
- PTO RPM – 540 / 1000
- Weight 330kg
- PTO Include
RT-690 disk chopper is designed for shredding branches, trunks with a diameter of up to 13 cm, and other wooden materials e.g. lumber-mill chips. The thickness of forest chips may be adjusted by means of four replaceable blades (made of HRDOX 500 steel), by adjusting their position against counter-blade. Blades are fixed to cutting disk with a diameter of 625 mm, which due to its weight serves as a flywheel.
The chopper is fitted with protective covers providing safe operation. Discharge stack may be rotated 360˚ in order to discharge stream of chips in proper direction. The chopper is characterized by high capacity and high comfort of operation. Chips may be used as a fuel (useful for screw feeders) or as a compost or a priming for shrubs.
Chopper’s drive is transmitted by power transmission shaft from tractor’s WOM (right-hand rotation). We recommend using power transmission shafts fitted with a shear pin coupling (available in our offer), in the case of machine overload the pin is sheared thus switching off the drive. Lubricating of rolling bearing is done by means of grease nipples in bearing shell.
PTO SHAFT inc.