Wood Chipper RTE630 manual transport frame
£2,590.00
Data sheet
| Minimum / recommended power | |
| Weight | 230 kg |
| Max. diameter of branch cutting (fresh and soft wood) | 130 mm |
| Max. diameter of branch cutting (fresh and hard wood) | 110 mm |
| Max. diameter of branch cutting (dry and hard wood) | 100 mm |
| Recommended rotation of WOM roller | |
| Cutting blade version | Steel HARDOX type 500 |
| Inlet hopper | 48 / 48 cm |
| Chopper dimensions with folded inlet hopper length / width / height | 85 / 85 / 150 cm |
| Chopper fixing system | |
| Cutting disk diameter | 630 mm |
| Number of blades | 4 + 1 reverse |
| Ejection pipe rotation angle | 360˚ |
| Height of ejection pipe | 155 cm |
Description
Information
RTE-630 disk chopper is designed for shredding branches, trunks with a diameter of up to 13 cm, and other wooden materials e.g. lumber-mill chips. The thickness of forest chips may be adjusted by means of four replaceable blades (made of HRDOX 500 steel), by adjusting their position against counter-blade. Blades are fixed to cutting disk with a diameter of 630 mm, which due to its weight serves as a flywheel.
The chopper is fitted with protective covers providing safe operation. Discharge stack may be rotated 360˚ in order to discharge stream of chips in proper direction. The chopper is characterised by high capacity and high comfort of operation. Chips may be used as a fuel (useful for screw feeders) or as a compost or a priming for shrubs.