|Minimum / recommended power||45 / 70 HP|
|Max. diameter of branch cutting (fresh and soft wood)||220 mm|
|Max. diameter of branch cutting (fresh and hard wood)||220 mm|
|Max. diameter of branch cutting (dry and hard wood)||220 mm|
|Recommended rotation of PTO roller||300-500 RPM|
|Chopper fixing system||Three point suspension system|
|Length / width of belt||300/40 cm|
The WOODPECKER RP-300 cutting and splitting chopper is designed for cutting and splitting, tree trunks up to 20 cm in diameter, the chipper has hydraulic pulling rollers with feed adjustment, so that you can obtain pieces of wood from 20 to 50 cm long.
The chipper is equipped with a safety switch and covers to ensure safe operation. The chipper has a system of material withdrawal from the feed hopper. The device is equipped with a belt conveyor with a length of 3 m to discharge the material processed. The crusher is characterized by high efficiency and high work comfort. The obtained pieces of wood were great as a fuel material.
The chipper drive is transmitted through the PTO shaft of the tractor PTO (right-hand turns). We recommend the use of power transmission shafts equipped with shear pin clutch (available in our offer), if the machine is overloaded, the pin is cut off and the drive is disconnected.